SONY FW-98BZ30L

A backlight is a form of illumination used in liquid crystal displays (LCDs). One type of backlight is made by LEDs, which can be either white or RGB (red green blue). White LEDs are used most often in notebooks and desktop screens, and in virtually all mobile LCD screens. RGB LEDs for backlighting are found in high-end color proofing displays such as HP DreamColor LP2480zx monitor or selected HP EliteBook notebooks, as well as newer consumer grade displays such as Dell's Studio series laptops which have an optional RGB LED display.

Backlighting is the illumination of a screen e.g. LCD (liquid crystal display). There are several types of backlighting with LEDs, e.g. full array, edge lit.

Size of the display for this product, measured diagonally, usually in inches.

The technology used in the display e.g. plasma, LED.

The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.

Brightness is the amount of radiating light emitted from the screen. The brightness rating is measured in candellas per square meter, commonly known as 'nits'.

Type of supported High Definition (e.g. Full HD, 4K Ultra HD).

A screen of a laptop, smartphone, etc., that responds to touch so you can control the interface using your fingers.

The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

The difference in light intensity between the brightest white and the darkest black.

A property of a display system, defined as the ratio of the luminance of the brightest color (white) to that of the darkest color (black) that the system is capable of producing.

Maximum horizontal angle at which a display can be viewed with acceptable visual performance.

Maximum vertical angle at which a display can be viewed with acceptable visual performance.

This is the size of the display screen, measured diagonally.

Describes which motion interpolation technology device uses e.g. BLS (Back Light Scanning), PPR (Picture Perfection Rate), PMR (Perfect Motion Rate), TruMotion.

The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.

Digital Visual Interface (DVI) is a video display interface to connect a video source to a display device, such as a computer monitor.

The device features a socket into which a USB cable can be plugged.

An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

Popular technology that allows an electronic device to exchange data or connect to the internet wirelessly using radio waves.

The socket (port) for the composite video input (white cable).

The two sockets (ports) for receiving left audio signal (white cable) and right audio signal (red cable).

The two sockets (ports) for transmitting left audio signal (white cable) and right audio signal (red cable).

The device contains speaker(s) to produce sound.

RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplifiers and loudspeakers.

The creation of a plan or convention for the construction of an object or a system.

Where the product can be placed e.g. indoor/outdoor, horizontal/vertical.